The Best Mega Ohm Meter – 2022

After hours of researching and comparing all models on the market, we find out the Best Mega Ohm Meter of 2022. Check our ranking below.

Our Picks For The Top Mega Ohm Meter

Overall Product Rankings

SaleRANK NO. #1
Myron L EP-10 DS Conductivity Meter, 0-10, 100, 1000, 10000 micromhos/microsiemens, 2-30 Mega Ohm
  • Conductivity Meter Ranges: 0-10, 100, 1000, 10,000 µM/µS
  • Temperature Automatic (to 25°C/77ºF) for conductivity Compensation samples between 10-71°C/50-160°F
  • Power One 9 volt battery supplied; Battery Life: >2000 tests/1 year
  • Cell Cup Chip and crack resistant polyethylene
  • Readout: 2½ in. taut-band shock resistant meter
RANK NO. #2
Klein Tools ET600 Multimeter, Megohmmeter Insulation Tester, 4000 Ohms Resistance, 125V/250V/500V/1000V, Auto-Ranging TRMS Multimeter
  • Voltage Tester tests insulation resistance up to 4000MΩ at 125V, 250V, 500V, and 1000V DC
  • Megohmmeter with test and lock buttons for simple insulation testing
  • Warning alarm and high voltage icon for detection of voltage
  • Measures up to 1000V AC/DC, resistance, and continuity
  • Automatic ranging True Root Mean Square (TRMS) technology for increased accuracy
  • Backlit display with bar graph, Auto-power off, High Voltage, Max/Min, and Hold icons
  • Low battery indicator with easily replaceable battery and fuse
SaleRANK NO. #3
Supco M500 Insulation Tester/Electronic Megohmmeter with Soft Carrying Case, 0 to 1000 megohms
  • Measure insulation values up to 1000 me ohms at 500 VAC
  • Zone scale to indicate insulation condition
  • Hand held
  • Test Leads store in case
  • Operates on 2 C batteries (not included)
SaleRANK NO. #4
Fluke - Fluke-1587 FC Fluke 1587 FC 2-In-1 Insulation Multimeter
  • PI (polarity index) /DAR (dielectric absorption ratio) with Trend It graphs identifies problems faster
  • Memory storage through mobile Fluke Connect Measurements App eliminates writing down results, reduces errors and saves data for historical tracking over time
  • Temperature Compensation through App helps establish accurate baselines and relevant historical comparisons
  • VFD low pass filter for accurate motor drive measurements; Includes auto discharge of capacitive voltage for added user protection
  • Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V
RANK NO. #5
Insulation Tester 50/100/250/500/1000V, Megohmmeter and Multimeter: 50k to 2G Insulation Resistance, DC/AC TRMS Voltage and Current, Resistance, Capacitance, Frequency, Temperature
  • Megohmmeter and Professional Multimeter combined into one Precision Instrument: Measure insulation resistance from 50kOhm to 2 Gigaohms with test voltages of 50V, 100V, 250V, 500V, or 1000V. The large backlit 5000 counts LCD display is easy to read and displays test voltage output and insulation resistance simultaneously. The meter is rated for 1000V CAT III installations.
  • With the eM870M you are not only getting an insulation tester but also a professional multimeter loaded with functions and features: Measures AC and DC voltage and current (True RMS for AC), Resistance, Continuity, Diode Test, Temperature (a thermocouple probe is included), Logic and Linear Frequencies, and even Capacitance.
  • This multimeter is powered by 6 AAA batteries. Auto-power off after 15 minutes to save battery life, but this feature can be disabled by the user. Autorange and Manual range, as well as Max, Min and Hold functions.
  • Package includes: one eM870M, two sets of test leads, alligator clips, one thermocouple probe, six AAA batteries, carrying case, and detailed user manual. 10-year Warranty.
SaleRANK NO. #6
Fluke 1577 Insulation Multimeter, LCD Display, 600 Megaohm Resistance, 500/1000V Voltage
  • Manual and auto ranging digital insulation multi meter measures insulation resistance, current, voltage, and resistance for testing line insulation on motors, generators, cables, and switch gear
  • True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform
  • Insulation test voltages of 550V and 1000V and insulation measurement range of 0.1 to 600 megaohms
  • Live circuit detection prevents insulation test when voltages over 30V are detected
  • Safety ratings include Ingress Protection certified IP40; European Conformity (CE) marking; UL 61010 1; ANSI/ISA S82.01 2004; CAN/CSA C22.2 No. 1010.1:2004; IEC safety standards 61010 1:1002 and 61010.1 04, IEC61557 1; IEC61557 2; and IEC/EN 61010 1, 2nd edition for Category III installations up to 1000V and Category IV installations up to 600V, and Pollution Degree 2
RANK NO. #7
Megger MIT310-EN Insulation Tester, 1000 Megaohms Resistance, 250V, 500V, 1000V Test Voltage
  • Insulation tester for testing insulation resistance, voltage, and continuity in electrical installations
  • Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform
  • Dual digital display with analog arc function to replicate response of analog meters
  • Measures insulation resistance from 0 to 1,000 megohms, voltage from 0 to 600V, and continuity from 0.01 to 100 ohms
  • Safety rated to European Standard EN61010-1 Category III, 600V and IP54 rated for protection against dust and splashing water
SaleRANK NO. #8
Fluke FLUKE-179-2/IMSK Industrial Multimeter Service Kit, 185 mm x 43 mm x 90 mm
  • Industrial thermometer combo kit
  • Full featured DMM with advanced electronic troubleshooting functions plus probes
RANK NO. #9
AEMC - 2126.52 6503 Hand-cranked Megohmmeter, 5000 Megaohms Resistance, 1000V Test Voltage
  • True Megohmmeter; includes test leads, clips, test probe (in detachable soft carrying case) and user manual, the case attaches to the carrying strap
  • Test voltages of 250V, 500V and 1000V
  • LED indicates constant voltage output and proper cranked speed
  • Automatic discharge when measurement is finished
  • Auto-ranging - dual scale operation for better sensitivity and easier readings
RANK NO. #10
Siglent Technologies SDM3045X 4-1/2 Digit Digital Multimeter, DMM
  • Dual display. True RMS. Basic DC accuracy: 01 percent
  • Dcv/dci, acv/aci, 2/4 wire R, C, CONT, diode, freq, period, Temp
  • Built-in cold junction compensation for TC temperature measurements
  • USB host, USB device, LAN interfaces
  • Up to 150 readings/sec, statistics, graphs

How Do You Buy The Best Mega Ohm Meter?

Do you get stressed out thinking about shopping for a great Mega Ohm Meter? Do doubts keep creeping into your mind? We understand because we’ve already gone through the whole process of researching Mega Ohm Meter, which is why we have assembled a comprehensive list of the greatest Mega Ohm Meter available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Mega Ohm Meter that you consider buying. Your questions might include the following:

  • Is it worth buying an Mega Ohm Meter?
  • What benefits are there with buying an Mega Ohm Meter?
  • What factors deserve consideration when shopping for an effective Mega Ohm Meter?
  • Why is it crucial to invest in any Mega Ohm Meter, much less the best one?
  • Which Mega Ohm Meter are good in the current market?
  • Where can you find information like this about Mega Ohm Meter?

We’re convinced that you likely have far more questions than just these regarding Mega Ohm Meter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Mega Ohm Meter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best possible Mega Ohm Meter. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Mega Ohm Meter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Mega Ohm Meter currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Mega Ohm Meter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Mega Ohm Meter?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Mega Ohm Meter.
  5. Customer Ratings: Number ratings grade Mega Ohm Meter objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Mega Ohm Meter.
  7. Product Quality: You don’t always get what you pay for with an Mega Ohm Meter, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Mega Ohm Meter is should be an indication of how long it will work out for you.

We always remember that maintaining Mega Ohm Meter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Mega Ohm Meter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.