Skip to content

The 10 Best 3/8 Fuel Line of 2022 – Reviewed and Top Rated

After hours of researching and comparing all models on the market, we find out the Best 3/8 Fuel Line of 2022. Check our ranking below.

RANK NO. #1
ACDelco Professional 32104 25 ft Bulk Reel of 3/8 in Fuel Line/PCV/EEC Hose
  • Nitrile tube that is spiral reinforced for enhanced durability
  • NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments
  • Vacuum rating of 24 in/Hg for sizes less than 1/2 in I.D., and 10 in/Hg for sizes 1/2 in to 3/4 in I.D. at ambient temperatures
  • Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications
  • Intended for use with fuels where MTBE concentrations are no greater than 15% by volume
RANK NO. #2
10 Feet NBR Fuel Line Hose Black Nylon Steel Oil Gas Fuel Line Hose 3/8 Inch Inside Diameter Suitable for Fuel Systems Engines Tube Hose
  • 【Material】 Premium nylon fiber wire materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection.
  • 【Strong and Durable】 Nylon Braided Fuel Hose Working Temperature Range: -40°F to +300°F, Maximum Working pressure: 290 PSI, Burst pressure: 1160 PSI. PROFESSIONAL OIL RESISTANT DN10MM 20BAR MAXIMUM W.P
  • 【Applicable】 Fuel line can work with diesel/ biodiesel/ gasoline/ Oil/ grease/ water and air, etc.
  • 【Applications】 Rubber fuel line widely used in the fuel system, oil cooling, steam emission, PCV system, please check the pressure of application before purchase.
RANK NO. #3
Fuel Line 3/8 Inch ID NBR Fuel Line Hose 10 Feet 6AN Push on Hose 5/8 Inch OD with 10 Clamps for Small Engines
  • NBR fuel line 3/8 specification: ID: 3/8" (10mm), OD: 5/8 inch (16mm), material: NBR, Length: 10FT,Working Pressure: 1.8Mpa, Burst Pressure: 5.6Mpa, Temperature Range: -40°F to 248°F.
  • NBR Push on Hose Fuel Gas Line with Clamps Application: 30r7 fuel line 3/8 widely used in fuel system, oil cooling system, steam emission system, PCV system, etc.
  • Fuel Line 3/8" ID NBR Hose Applicable Medium: 3/8 fuel line fit for small engine, it can work with diesel, biodiesel, gasoline, Oil, grease,water and air,etc.
  • High Quality: 3/8 Inch ID NBR fuel line hose is made of high quality nitrile butadiene rubber(NBR), high temperature resistance, corrosion resistance, wear resistance, not easy to aging and long service life.
  • Satisfaction guaranteed: Buy our nbr fuel line hose within 30 days, have any questions please timely contact me, we will give you a satisfactory reply within 24 hours.
RANK NO. #4
Fuel Line 3/8 Inch ID NBR Fuel Line Hose 6AN Push on Hose for Small Engine 10 Feet
  • Size: ID: 3/8" (10mm), OD: 5/8 inch (16mm), AN6 Fuel Hose, Length: 10FT.
  • Material: This small engine fuel line is made of high-quality NBR, which is oil resistant.
  • Working Pressure: 0.6Mpa, Burst Pressure: 1.8Mpa, Temperature Range: -40°F to 248°F.
  • Application: Designed for conveying gasoline, diesel, biodiesel fuel, engine oil or water in car, truck, bus, automotive, etc. Please check the pressure of application before purchase.
  • How To Use: Use hose barbs and fuel line clamps to install.
RANK NO. #5
EVIL ENERGY 3/8 Fuel Hose Line NBR Rubber 30R7 10FT 300PSI
  • ID: 3/8inch (10mm),OD: 2/3inch(17mm).Material: NBR.
  • Working Pressure: 300psi. Burst Pressure: 1160psi. Temperature Range: -40°F to 257°F. Minimum Bend Radius: 3.9inch(100mm).
  • Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air,etc.
  • Application: SAE 30R7 rubber fuel line widely used in fuel system, oil cooling, steam emission, PCV system, please check the pressure of application before perchase.
  • EVIL ENERGY provide 10ft 3/8inch fuel hose 3-month warranty.Any problem you might have, please feel free to contact us via Amazon message.
RANK NO. #6
Continental 65128 3/8" ID Fuel Hose - 50 psi - SAE 30R7 - 25' Length
  • 2-spiral synthetic reinforcement
  • SAE 30R7
  • Not for fuel injection systems
  • Length: 1.6´ (clamshell), 2´ (clamshell), 25´ (spool), 50´ (carton), 250´ (reel)
RANK NO. #7
Dayco 80063 3/8 Fuel Line 25 Ft Roll
  • Package length:18.2 cm
  • Package width:17.8 cm
  • Package height:17.0 cm
  • Product Type:AUTO PART
RANK NO. #8
PRO 1 Fuel Line Hose 3/8 Inch Inside Diameter X 5 Feet Length NRB/PVCC SAE30R6
  • 5 Foot Piece of 3/8" ID Black Rubber Fuel Line Made in the USA
  • Flexible and can be used for Cars, Trucks, Tractors, or Small Engines
  • Nitrile Tube Construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover
  • Designed for Conveying Gasoline E85 and Diesel Fuel
  • Temperature Resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit
RANK NO. #9
25FT PTFE Fuel line Kit: 6AN 3/8" Fuel Hose EFI LS Fuel Injection line E85 Oil Gas Hose Fitting Kit Nylon Stainless Steel
  • 【Premium Material】T7 Aluminum Alloy & Nylon & PTFE Teflon PTFE has excellent corrosion resistance. Polished and anodized surface provide the bright appearance, corrosion protection and strong strength. It is maintenance free and precision engineered to increase life
  • 【Braided gas line Inner diameter】Inner Diameter: 5/16 inch, outside diameter: 0.465inch. Please measure before purchase
  • 【Working Temperature】Withstands Operating Temperatures from -76℉ to +446℉. Working Pressure: 3000 PSI. Can work in environments with large temperature differences
  • 【Wide Application】This 6AN 25FT braided PTFE Lined Hose Kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line, turbocharger fuel line and other high temperature high pressure applications
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended
SaleRANK NO. #10
Dynamic FLK-38 Automotive Replacement Fuel Line Repair Kit 3/8 in (10mm), 23 Pack
  • Save Time and Money with the Dynamic FLK-38 3/8" Nylon or Steel Fuel Line Repair Kit
  • 25 FEET 3/8" NYLON FUEL LINE TUBING
  • QTY 2, 90 DEGREE 3/8" QUICK DISCONNECT
  • QTY 2, STRAIGHT 3/8" QUICK DISCONNECT
  • QTY 2, 3/8" NYLON TO STEEL COMPRESSION UNION

How Do You Buy The Best 3/8 Fuel Line?

Do you get stressed out thinking about shopping for a great 3/8 Fuel Line? Do doubts keep creeping into your mind? We understand because we’ve already gone through the whole process of researching 3/8 Fuel Line, which is why we have assembled a comprehensive list of the greatest 3/8 Fuel Line available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 3/8 Fuel Line that you consider buying. Your questions might include the following:

  • Is it worth buying an 3/8 Fuel Line?
  • What benefits are there with buying an 3/8 Fuel Line?
  • What factors deserve consideration when shopping for an effective 3/8 Fuel Line?
  • Why is it crucial to invest in any 3/8 Fuel Line, much less the best one?
  • Which 3/8 Fuel Line are good in the current market?
  • Where can you find information like this about 3/8 Fuel Line?

We’re convinced that you likely have far more questions than just these regarding 3/8 Fuel Line, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 3/8 Fuel Line, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best possible 3/8 Fuel Line. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 3/8 Fuel Line buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 3/8 Fuel Line currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of 3/8 Fuel Line has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an 3/8 Fuel Line?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your 3/8 Fuel Line.
  5. Customer Ratings: Number ratings grade 3/8 Fuel Line objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 3/8 Fuel Line.
  7. Product Quality: You don’t always get what you pay for with an 3/8 Fuel Line, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an 3/8 Fuel Line is should be an indication of how long it will work out for you.

We always remember that maintaining 3/8 Fuel Line information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 3/8 Fuel Line is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.